Xi'an Weinuo Machinery And Equipment Co.,Ltd
Industry Knowledge
Xi'an Weinuo Machinery And Equipment Co.,Ltd

Xi'an Weinuo Machinery And Equipment Co.,Ltd

Add: Room 1101, Block 9 Taihua Jinmao International Plaza, No.16 South of Fenghui Road,      High-tech Zone, Xi’an, Shannxi Province, China 

Tel: 86 29 88332871  88324190

Fax: 86 29 88338589

E mail: tang@fycbearings.com

Industry Info

How to install linear motion ball bearings

Source:

Steps to install linear motion ball bearings:

1.before installing linear motion ball bearings,remove the flash, dirt and surface scars on the mechanical mounting surface. Linear bearings coated with anti-rust oil, before installation, please use the cleaning oil to clean the base surface. use low-viscosity oil painting spindle

2.placed a linear bearing on the bed table, the use of lateral fixation screws or other fixed fixture so that the line rail and the lateral mounting surface gently fit. confirm whether the match screw holes

3.from the central to both sides in order to align the linear bearing set screw tightening, so that the track and the vertical mounting surface fit, from the central location to the two ends of the compression can be more stable accuracy. 

4.the use of torque wrench in accordance with a variety of materials one by one locking torque, the linear bearing sliding rail screw slowly screw tight. 

5.use of the same installation method to install the vice rail, and the individual installation slide to the main rail and the sub-rail. Note After the slide rail is mounted on the slide rail, many accessories can not be installed because of the limited installation space. All accessories must be installed together at this stage.

6.place mobile platform to the linear bearing main rail and the sub-rail of the slide, and then locking the mobile platform on the side of the tightening screws, installation positioning can be completed.



Contact Us

Xi'an Weinuo Machinery And Equipment Co.,Ltd

Add: Room 1101, Block 9 Taihua Jinmao International Plaza, No.16 South of Fenghui Road,      High-tech Zone, Xi’an, Shannxi Province, China 

Tel: 86 29 88332871  88324190

Fax: 86 29 88338589

E mail: tang@fycbearings.com

Copyright © Xi'an Weinuo Machinery And Equipment Co.,Ltd