5300 Bearing

If you are going to import 5300 bearing in stock or you want to check the price with one China 5300 bearing manufacturer, supplier and factory, please feel free to contact Weinuo Machinery.

1. Precision

Current precision :  P0,  P6.

Noise level :   Z1 or above as per buyer’s request 

2. Contact angle :  30°

3. Cage types for  angular conatact ball bearings- double row 

4. Application

Double Row Angular Contact ball bearings have two rows of balls arranged back-to-back. The lines of action of the load at the contact between balls and raceways (load lines) diverge at the bearing axis and form an angle of 30° to the radial plane.

In essence, they work similarly to having a matched pair of Single Row Angular Contact ball bearings either face-to-face or back-to-back. The difference is that Double Row Angular Contact ball bearings can take a bi-directional axial load in one bearing where it takes a matched pair otherwise. This means the bearings are particularly suitable for accommodating simultaneously acting radial load and axial load in both directions.

They are also available with seals or shields.

Widely used for machine tool spindle, high frequency motors, gas turbines, centrifuges, small car front wheel, the differential pinion shaft double row angular contact ball bearings: pump, blower, air compressor, various types of transmission, fuel injection pumps,  printing machinery.

5. Material 

Careful selection of material is a factor when applications require bearings to provide superior hardness and anti-corrosion or heat-resistance. So we always choose standard materials.

Chrome Steel

Stainless Steel

6. How  HTH to make  heat Treatment for bearings

Heat-treatments consisted of preheating samples at 843 C (1550 F) using a Sybron Thermolyne 30400 furnace, and then austenitizing samples in a Keith furnace at temperatures of 843-1215 C (1550-2220 F); immediately followed by warm high-speed oil quenching at 48.9 C (120 F). Pre-heating was done to ramp the temperature of the samples prior to austenitizing and to prevent thermal shock. 

One heat treatment per steel was carried out with cryogenic quenching at -48.9 C (-120 F) immediately after oil quenching to increase the formation of marten site. The cryogenic quench was prepared by submerging dry ice into ethanol. 

The final step was tempering, it was conducted at temperatures ranging from 135 to 537 C (275-1000 F). 

More information please contact us: tang@fycbearings.com